油水两相渗流压力脉动的实验及数值分析

本文用高精度的压差传感器和高速度的数据采集设备同时测量出油水两相流体在多孔介质流动时产生的较大压力降和微小压力脉动,应用自行研制的大型数据处理软件对恒流速水驱油的两相渗流压力脉动实验数据进行了分析,发现不同阶段压力脉动具有明显的频谱特性和时间相关特性的不同,在第三阶段（油为主,水增加阶段）谱能增加最大,时间正相关程度最强。     

负压爆炸载荷和数据采集间隔对弹性开孔板动应力集中的影响

基于ANSYS 7.0/LS-DYNA程序,对3 m3 m四边简支,厚度0.025 m,中心开有0.3 m0.3 m方孔的弹性板,在正压和负压三角爆炸载荷作用下的应力响应进行了分析,利用能量密度时间分布函数（TDFED）确定了动应力集中因子,并给出其计算步骤。计算结果表明计算总时间和数据采集时间间隔对动应力集中因子影响较大,而负压荷载影响较小。     

Pressure-dependent viscosity of powder injection moulding compounds

A single piston capillary rheometer was modified by the addition of a second chamber with a restricting valve (developed at the Polymer Centre, Zlín, Czech Republic), which provides backpressure and increasing the pressure in the melted material during the flow through the die. The Carreau–Yasuda model was employed to fit the measured viscosity data and determine the temperature and pressure coefficients for polyolefin based binder and its compounds with carbide powder. Both temperature and pressure sensitivity coefficients are largely dependent on the structure of a polymer, which should be taken into account for binder-formation’s development. Increasing the loading level of the powder in the compound diminishes the pressure sensitivity of their flow properties.     

Regime diagram of the development of long-wave near-wall disturbances in a hypersonic boundary layer

A regime diagram of the development of slow near-wall disturbances induced by an unsteady self-induced pressure perturbation in a hypersonic boundary layer is constructed for a disturbance wavelength greater than the boundary layer thickness. It is shown that the main factors shaping the perturbed flow are the gas enthalpy near the body surface, the intensity of the viscous-inviscid interaction, and the nature (sub- or supersonic) of the main part of the boundary layer. Nonlinear boundary-value problems are formulated for regimes in which the near-wall boundary layer region plays a decisive role. Numerical and analytical solutions are obtained in the linear approximation. It is shown that intensification of the viscous-inviscid interaction or an increase in the role of the supersonic main region of the boundary layer impart generally supersonic properties to the main part of the boundary layer, i.e. the upstream propagation of the disturbances is damped and the disturbance growth downstream becomes more intense. Damping of the viscous-inviscid interaction and an increase in the role of the subsonic main part of the boundary layer have the opposite effect. Surface cooling increases the effect of the main part of the boundary layer on the formation of pressure disturbances and surface heating leads to an increase in the effect of the near-wall boundary layer region. It is also shown that for the regimes considered disturbances propagate in a direction opposite to that of the free stream from the turbulent flow region located downstream of the local disturbance development region.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, 2004, pp. 59–71. Original Russian Text Copyright © 2004 by Bogolepov and Neiland.     

An asymmetrical periodic vortical structures and appearance of the self induced pressure gradient in the modified Taylor flow

An incompressible liquid flow in the gap between two coaxial cylinders, such that the inner rotating (wavy) cylinder has a periodically varying radius along the axial direction while the outer stationary cylinder has a constant radius, is studied experimentally and theoretically. Basic attention is focused on the symmetry-breaking phenomenon of the vortex flow arising from the rotation of the inner wavy cylinder. It is found that the symmetry-breaking phenomenon of the vortical flow structures in this geometry is accompanied by the occurrence of a self-induced axial pressure gradient. A theoretical formulation of the problem of periodic vortical flow prevailing in such a geometry having large axial length is presented. The comparison between the computed and the experimental results is presented and the underlying phenomena are discussed.     

非饱和土的广义朗肯土压力

本文从 4条基本假设出发 ,建立了非饱和土的广义朗肯土压力公式 ,采用理想试验对该公式进行了验证 ,在北京地铁13号线的东直门车站基坑工程中理论分析结果和实测值非常接近 ,证明了该理论的有效性。土的广义朗肯土压力公式建立了土的试验指标与原位指标的关系 ,从理论上给出了用土的试验指标得到原位主动 (被动 )土压力的方法。对于非饱和土 ,采用简单易得的直剪试验指标应用广义朗肯土压力公式就可以得到相当精确的结果 ,弥补了扩展朗肯土压力理论的不足。而且广义朗肯土压力公式能够合理利用已有的工程经验和工程数据 ,为非饱和土力学的工程实用化提供了一条新的思路。     

开槽对大跨悬挑平屋盖结构风荷载的影响

本文结合一大跨悬挑平屋盖模型的风洞试验研究，分析了此类结构屋盖的平均局部体型系数和极值局部体型系数的分布特性；并根据其风压的分布特性，提出在悬挑屋盖承受较大负压的屋檐和角点附近这些遇强风易发生破坏的部位采取开槽气动抗风措施，进一步研究了该气动抗风措施对大跨悬挑平屋盖结构风荷载的影响，试验结果显示，它们可以有效地削减屋盖风敏感处的风荷载值，使平均局部体型系数大约降低50％，极值局部体型系数大约降低25％，所得的这些结果对于结构的抗风设计有一定的指导意义。     

两个相邻建筑物周围风环境的数值模拟

高层建筑物及其群体周围所引起的风环境问题正日益受到人们的重视。本文用数值模拟方法对两幢串列布置高层建筑周围的流场进行了模拟，讨论了建筑物高度、间距比等因素对风环境特性的影响。为了与两个相邻建筑物的流场进行比较，本文同时计算了单个建筑物周围流动的分布情况。数值模拟结果对揭示高层建筑群区域内再生风载荷的形成机理提供了一定的分析方法，为城市规划和高层建筑住宅小区设计提供了一定的理论参考和依据。     

建筑风压场数值模拟中压力波动的平抑

在以同位网格为基础的简单流场压力计算中,通常采用动量插值方法来平抑流场中的压力波动现象;但是对于建筑风场等复杂的钝体绕流问题,由该平抑方法得到的收敛风压场仍可能存在小幅波动。为彻底解决同位网格格式下的压力波动,除采用动量插值方法外,本文提出了在压力校正方程的界面流速中添加压力梯度差值项的方法。算例分析表明,该方法计算得到的建筑风压场完全避免了压力波动现象,风压解与试验结果吻合良好。     

Microscale heat transfer in an evaporating moving extended meniscus

The evaporative heat flux distribution in the leading edge region of a moving evaporating thin liquid film of pentane on quartz was obtained by analyzing the measured thickness profile for thicknesses, δ < 2 μm. The profiles in a constrained vapor bubble were obtained using image analyzing interferometry. Although the evaporating meniscus appeared to be benign (i.e., without additional observed motion beyond creeping), high heat fluxes were obtained. Significantly higher heat fluxes are possible. The interfacial slope, curvature, interfacial shear stress, and liquid pressure profiles were also obtained. Results obtained using a continuum model were consistent with those obtained using a control volume model. The measured pressure field profile of the isothermal extended meniscus agreed with the constant pressure field predicted by the augmented Young–Laplace model. For the non-isothermal case, measured thickness gradients lead to disjoining pressure and curvature gradients for fluid flow and evaporation. The experimental results demonstrate that disjoining pressure at the contact line controls fluid flow within an evaporating completely wetting thin curved film and is, therefore, a useful boundary condition. However, in small interfacial systems, non-idealities can have a dramatic effect.